Video - How to build a computer
Video - How to build a computer
Hey everyone. This video was made by me, it's only the basics really, i didn't show things such as setting hard drive jumpers, or motherboard jumpers, etc.
Also, i accidentally forgot to plug in the molex connector, so just kind of keep that it mind. Anyway, i actually intended the video to be all one piece, but i kept getting interrupted so it's in 3 parts now.
First interruption was severe thunderstorms + tornadoes going through my town, second one was the camera just stopped recording, and the third one was the memory card got full. I actually remade one of the segments, so it only looks like i got interrupted 2 times, for those that do the math... Anyway, enjoy.
Part 1
Part 2
Part 3
Also, i accidentally forgot to plug in the molex connector, so just kind of keep that it mind. Anyway, i actually intended the video to be all one piece, but i kept getting interrupted so it's in 3 parts now.
First interruption was severe thunderstorms + tornadoes going through my town, second one was the camera just stopped recording, and the third one was the memory card got full. I actually remade one of the segments, so it only looks like i got interrupted 2 times, for those that do the math... Anyway, enjoy.
Part 1
Part 2
Part 3
¯\_(ツ)_/¯ It works on my machine...
good job
I was really impressed - more because you built the computer with only your left hand! You needed a person to hold the camera to free up your right hand
Its a bitch to snap in RAM, but I watched you do it with one hand!
DNR
Its a bitch to snap in RAM, but I watched you do it with one hand!
DNR
-
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
- floodhound2
- ∑lectronic counselor
- Posts: 2117
- Joined: 03 Sep 2006, 16:00
- 17
- Location: 127.0.0.1
- Contact:
-
- Fame ! Where are the chicks?!
- Posts: 213
- Joined: 15 Apr 2006, 16:00
- 18
- Location: Quebec, CA
- Contact:
Hey sorry to Bump that, but i was wondering. When buying new parts and a new case, How can you be sure that everything will physically fit in? I'm talking about width, height, lenght and the case's screw hole alignement towards our hardware's screw hole alignement. Is there some sort of standard sizes to everything or what?
- computathug
- Administrator
- Posts: 2693
- Joined: 29 Mar 2007, 16:00
- 17
- Location: UK
- Contact:
Yeah, it depends on the size of the mobo as generally larger ones wont fit into smaller towers, but the smaller boards will fit into the larger towers as they are a standard size. If the tower is big enough then the size of the mobo wont be important but make sure that it has the correct power supply for the board.ulysse wrote:Hey sorry to Bump that, but i was wondering. When buying new parts and a new case, How can you be sure that everything will physically fit in? I'm talking about width, height, lenght and the case's screw hole alignement towards our hardware's screw hole alignement. Is there some sort of standard sizes to everything or what?
- floodhound2
- ∑lectronic counselor
- Posts: 2117
- Joined: 03 Sep 2006, 16:00
- 17
- Location: 127.0.0.1
- Contact:
Cases are made to fit a specific standard i.e. ATX, Micro ATX, mini ATX.ulysse wrote:Hey sorry to Bump that, but i was wondering. When buying new parts and a new case, How can you be sure that everything will physically fit in? I'm talking about width, height, lenght and the case's screw hole alignement towards our hardware's screw hole alignement. Is there some sort of standard sizes to everything or what?
Thus the mother board must match as well.
New stuff is multi package capable. This means a case will will have the foot prints required to fit most all sizes of motherboards, but check to make sure.
₣£ΘΘĐĦΘŮŇĐ
- floodhound2
- ∑lectronic counselor
- Posts: 2117
- Joined: 03 Sep 2006, 16:00
- 17
- Location: 127.0.0.1
- Contact:
The PSU is almost always standard today. There are some slight differences in processor power input connector and serial HD power connectors, but typicaly an adapter can be used in this rare situation, or simply a modification in the power connector can be made by breaking or adding the already suppled extra connector. Just make sure to match the motherboard with your power supply. Most new, good cases come with a decent power supply that is universal. Look here fore more information
http://www.suck-oold.com/modules.php?na ... pic&t=4850
Now if you building an old system like 15 years old then look into an AT PSU.
Also the HD and other devices will fit with no problems because it is all standard modular type stuff. Your case will come with screws and other types of hardware to make things easy for you.
Caution - when installing the motherboard make sure to use the standoffs!!!!
http://www.suck-oold.com/modules.php?na ... pic&t=4850
Now if you building an old system like 15 years old then look into an AT PSU.
Also the HD and other devices will fit with no problems because it is all standard modular type stuff. Your case will come with screws and other types of hardware to make things easy for you.
Caution - when installing the motherboard make sure to use the standoffs!!!!
₣£ΘΘĐĦΘŮŇĐ
tricks of an old builder
When you build many boxes, including in tight spaces like a u2 rackmount, you pick up a few tricks.
One trick I learned at a network solutions company was folding the ribbon cables to route from the device to mobo. It had to be flat and neat to promote good air flow. You can make sharp folds in ribbon cable and not have any loss of QoS. Since we build many computers with the same specs for a company, we would use a copy machine to photocopy the folded ribbon cable and put it in their file in case they order more later.
You want to tie up cables and secure them out of the way, it makes for a cooler, neater box to look at and in function.
Don't forget to protect your box by wearing a ESD bracelet or at least installing the PSU first and plugging it in - you have a ground wire on the PSU that grounds the metal frame of your box - having it plugged in - provides a ground for you to touch off any ESD while working. You cannot get electrocuted unless you fuck with the PSU like a noob, this set up is to PROTECT the computer, not you Remember, the Electrostatic shock you can FEEL is about 3,000 volts to 8,000volts, your mobo can be easily killed by ESD caused by your anal hairs flapping when you fart.
Also, you can splice on to another fan's DC supply to run two fans - I did this on a box back in 1996 and it is still running Server packages have super fans, and since you leave your computer on as long, you should have the same supreme cooling. Just add on a fan and follow the push/pull of the other fan's airflow.
DNR
One trick I learned at a network solutions company was folding the ribbon cables to route from the device to mobo. It had to be flat and neat to promote good air flow. You can make sharp folds in ribbon cable and not have any loss of QoS. Since we build many computers with the same specs for a company, we would use a copy machine to photocopy the folded ribbon cable and put it in their file in case they order more later.
You want to tie up cables and secure them out of the way, it makes for a cooler, neater box to look at and in function.
Don't forget to protect your box by wearing a ESD bracelet or at least installing the PSU first and plugging it in - you have a ground wire on the PSU that grounds the metal frame of your box - having it plugged in - provides a ground for you to touch off any ESD while working. You cannot get electrocuted unless you fuck with the PSU like a noob, this set up is to PROTECT the computer, not you Remember, the Electrostatic shock you can FEEL is about 3,000 volts to 8,000volts, your mobo can be easily killed by ESD caused by your anal hairs flapping when you fart.
Also, you can splice on to another fan's DC supply to run two fans - I did this on a box back in 1996 and it is still running Server packages have super fans, and since you leave your computer on as long, you should have the same supreme cooling. Just add on a fan and follow the push/pull of the other fan's airflow.
DNR
-
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.