So my current router is a not very good as it does not have VPN support apart from pass-through.
So i am looking for a new router but i am unsure on what to get.
It would need to have support for VPN so that i can connect to a swissvpn account and then have computers on the network connect to the router but not all the computers on the network.
So what would you recommend?
and what router do you currently have?
New Router..
- hpprinter100
- Fame ! Where are the chicks?!
- Posts: 214
- Joined: 19 Oct 2007, 16:00
- 16
- Contact:
- bad_brain
- Site Owner
- Posts: 11636
- Joined: 06 Apr 2005, 16:00
- 19
- Location: In your eye floaters.
- Contact:
I have a router/DSL modem combo from Netgear:
http://www.netgear.com/Products/Routers ... G834G.aspx
I can really recommend it (there are also versions without modem of course), Netgear is simply the best imo...also the features provide all you need (VPN too).
http://www.netgear.com/Products/Routers ... G834G.aspx
I can really recommend it (there are also versions without modem of course), Netgear is simply the best imo...also the features provide all you need (VPN too).
- bad_brain
- Site Owner
- Posts: 11636
- Joined: 06 Apr 2005, 16:00
- 19
- Location: In your eye floaters.
- Contact:
for wardriving you mean?
best look for Buffalo ones, might have changed in the meantime (I'm not really an active wardriver anymore since I have a fast internet connection), but in my active days Buffalo cards were the top ones because some of them had external antenna connectors...can be used for the famous "cantenna" for example (http://en.wikipedia.org/wiki/Cantenna)....
best look for Buffalo ones, might have changed in the meantime (I'm not really an active wardriver anymore since I have a fast internet connection), but in my active days Buffalo cards were the top ones because some of them had external antenna connectors...can be used for the famous "cantenna" for example (http://en.wikipedia.org/wiki/Cantenna)....
- hpprinter100
- Fame ! Where are the chicks?!
- Posts: 214
- Joined: 19 Oct 2007, 16:00
- 16
- Contact: