graphics trouble help needed!

Post by **alien100** » 09 May 2007, 16:29

I have a ECS p4-m800-m7 3.1 motherboard with an onboard graphics card
I am trying to install my AGP graphics card but its not working

I cant seem to disable the onboard gfx card it doesent want to dunno why?
Everytime I try to boot with the AGP it gets to the Welcome screen and restarts.

can you tell me how to fix this a.s.a.p help would be appreciated!

Post by **computathug** » 09 May 2007, 16:54

When there is no disable option in the BIOS put the shared memory to zero MB.

Post by **alien100** » 10 May 2007, 01:18

computathug wrote:When there is no disable option in the BIOS put the shared memory to zero MB.

i cant the minimum is 16mb

Post by **bad_brain** » 10 May 2007, 05:40

in BIOS go to PCI / Plug and Play Setup, set the Primary Graphics Adapter to AGP...that's all....

Post by **alien100** » 10 May 2007, 09:04

bad_brain wrote:in BIOS go to PCI / Plug and Play Setup, set the Primary Graphics Adapter to AGP...that's all....

I did that b_b and it doesent work

Post by **alien100** » 10 May 2007, 12:00

I fixed it

i was using faulty drivers

Post by **pseudo_opcode** » 10 May 2007, 12:20

alien100 wrote:I fixed it i was using faulty drivers

i told you..