help setting up laptop

For beginners, flames not allowed...(just by the staff :P)
Post Reply
User avatar
phil823
forum buddy
forum buddy
Posts: 12
Joined: 29 Aug 2005, 16:00
18

help setting up laptop

Post by phil823 »

i took my old laptop out its OLD lol...ok well heres the spec's

Windows ME
P2
128mb Ram
Cisco systems 340 series wireless Lan Adapter
5.98gb Hardrive

LOL are these spec's even good enough to do anything with??

I dont have the ME disk nor do i have any of the driver disks for this baby, so im scared that if i reformat it and through linux on it, that itll be screwed up lol.

ALSO once i pop my wireless card, is there a program to scan for wireless around me, and choose which i want to connect to?? so i know NOTHING about wirless lol

User avatar
bad_brain
Site Owner
Site Owner
Posts: 11636
Joined: 06 Apr 2005, 16:00
18
Location: In your eye floaters.
Contact:

Post by bad_brain »

um,well,my old lappy is a P2 too, but only with 48mb RAM and I run 2000 on it (XP don´t work because it demands at least 64mb). it´s not the fastest one of course but it´s ok for wardriving. Redhat9 worked too on it.
all you need is netstumbler to scan for networks/access points, to connect you simply enter the network name in your WLAN settings, that´s all (at least for unencrypted networks)... :wink:

User avatar
phil823
forum buddy
forum buddy
Posts: 12
Joined: 29 Aug 2005, 16:00
18

Post by phil823 »

ok i tryed netstumbler.... lol...it cant find my wireless card LOL...when i put the card in it said it installed it....mabey i need to update drivers?

User avatar
bad_brain
Site Owner
Site Owner
Posts: 11636
Joined: 06 Apr 2005, 16:00
18
Location: In your eye floaters.
Contact:

Post by bad_brain »

I looked around a bit and it seems to be a well-known problem with the Cisco card, check if it works with this driver:

http://www.wildpackets.com/elements/dri ... PCX500.zip

oh,and you still using ME on it? should be 2000 at least... :wink:

User avatar
phil823
forum buddy
forum buddy
Posts: 12
Joined: 29 Aug 2005, 16:00
18

Post by phil823 »

thx alot brain for helping me look!


MMM ME not supported for this...can i use this driver and a form of linux together?

Post Reply