Glow logo on car
Re: Glow logo on car
Thanks! In fact, I was going to mention this on my next update.
In my case, I'll be using the touch-up paint that's for my color of car.
I'm not sure what you mean by sandwich, but I'm planning on having plastic attached on the inside of the trunk with the two pieces of logo on the outside. To solve the visibility of parts inside of the trunk, I ordered some clear carbon fiber style vinyl to put on the plastic.
I can't be sure how effective the vinyl will be just yet, but I'll know when it comes in. At least it might offer some UV protection for the plastic.
The adhesive I'll be using is E6000. I decided on E6000 rather than Gorilla Glue just because I have previous experience using E6000 on a pendant I wear daily and it's been through all sorta of weather successfully.
I also considered covering the two logo pieces with black carbon fiber vinyl...might look good once I get the car painted black..not probably not now.
Thanks again!
In my case, I'll be using the touch-up paint that's for my color of car.
I'm not sure what you mean by sandwich, but I'm planning on having plastic attached on the inside of the trunk with the two pieces of logo on the outside. To solve the visibility of parts inside of the trunk, I ordered some clear carbon fiber style vinyl to put on the plastic.
I can't be sure how effective the vinyl will be just yet, but I'll know when it comes in. At least it might offer some UV protection for the plastic.
The adhesive I'll be using is E6000. I decided on E6000 rather than Gorilla Glue just because I have previous experience using E6000 on a pendant I wear daily and it's been through all sorta of weather successfully.
I also considered covering the two logo pieces with black carbon fiber vinyl...might look good once I get the car painted black..not probably not now.
Thanks again!
Re: Glow logo on car
you got the right idea, the 'sandwich' is the gluing of the two halfs - inside and outside parts together. I just wanted you to make it air tight so the bare metal is protected from the environment.
The sandwich I wish could be screwed together - for repairs. the glue was only meant like a sealant - it can be removed.
Both inside and outside halves need sealant. But if you rust proof the bare metal, then you are just sealing to prevent rain and water getting in
DN
The sandwich I wish could be screwed together - for repairs. the glue was only meant like a sealant - it can be removed.
Both inside and outside halves need sealant. But if you rust proof the bare metal, then you are just sealing to prevent rain and water getting in
DN
-
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
Re: Glow logo on car
I prefer the idea of screwing it in, too...though aesthetically it just wouldn't do.
The glue I'm using is waterproof so it should also act like a gasket.
The project's on hold until the vinyl comes in and until I get paid Thursday. In the meantime, I got a sample of the vinyl in and I think it'll do its job quite nicely.
Thanks for the response!
A teaser of the vinyl:
The glue I'm using is waterproof so it should also act like a gasket.
The project's on hold until the vinyl comes in and until I get paid Thursday. In the meantime, I got a sample of the vinyl in and I think it'll do its job quite nicely.
Thanks for the response!
A teaser of the vinyl:
Re: Glow logo on car
Necrix - it is a project, and of course by geek nature we all are interested. Keep up with the photos
DNR
DNR
-
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
-
- Newbie
- Posts: 6
- Joined: 15 Oct 2011, 07:22
- 12
Re: Glow logo on car
thanks for idea brother
Re: Glow logo on car
A little preview of it.
It's not attached to the car yet, I'm currently devising ways to do this besides gluing it in. Gluing it just doesn't seem feasible as it'd have to be held in place perfectly..if this thing is misaligned, it looks *terrible* (though it's obviously not perfect anyway)
misaligned:
I don't think it'll be too hard to figure something out...probably something self adhesive strategically placed..
...duct tape (jk)
Anyway, I have to say that I'm eager to finally get this done and to move onto another project!!
Also, having had such a break from this project..I realized how crazy I was for starting it in the first place haha. I guess it's not too shabby for being mostly hand-filed. If I were to do it in the future, I might just get a same-thickness sheet metal machined at a machine shop and then all I would have to do is cut the hole in the car perfectly.
Have a good day!
It's not attached to the car yet, I'm currently devising ways to do this besides gluing it in. Gluing it just doesn't seem feasible as it'd have to be held in place perfectly..if this thing is misaligned, it looks *terrible* (though it's obviously not perfect anyway)
misaligned:
I don't think it'll be too hard to figure something out...probably something self adhesive strategically placed..
...duct tape (jk)
Anyway, I have to say that I'm eager to finally get this done and to move onto another project!!
Also, having had such a break from this project..I realized how crazy I was for starting it in the first place haha. I guess it's not too shabby for being mostly hand-filed. If I were to do it in the future, I might just get a same-thickness sheet metal machined at a machine shop and then all I would have to do is cut the hole in the car perfectly.
Have a good day!
Re: Glow logo on car
I like the carbon fiber look for the emblem - you might have something here - why not make mercedes, caddilac, and even mustang emblems out of carbon fiber and sell them?
My olds intrigue has a similar logo like yours, a black carbon fiber emblem on the white hood would have been bad ass - a little message that this is no ordinary intrigue...
DNR
My olds intrigue has a similar logo like yours, a black carbon fiber emblem on the white hood would have been bad ass - a little message that this is no ordinary intrigue...
DNR
-
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
Re: Glow logo on car
Thanks! Unfortunately, people are already doing it...
http://www.ebay.com/sch/i.html?_from=R4 ... Categories" onclick="window.open(this.href);return false;
http://www.ebay.com/sch/i.html?_from=R4 ... Categories" onclick="window.open(this.href);return false;
Re: Glow logo on car
Never be discouraged because someone else did/doing it. There is always another way to do something better.
There is also the local market to take advantage of, that people on the 'net can't grasp - friends have sold handmade stuff to local shops.
One did pager/cell phone cases out of leather (there were factory made ones at the time- but crappy), another sold R14 refrigerant for cars (it was being banned for the newer 'green' refrigerant, but old cars needed it) by going shop to shop.
I myself, I used to install car audio, car phones, and security systems at people's homes or businesses - while there were plenty of Stereo shops out there - no one liked to wait in some waiting room. My company allowed them to be at home or work while I installed their toys.
DNR
There is also the local market to take advantage of, that people on the 'net can't grasp - friends have sold handmade stuff to local shops.
One did pager/cell phone cases out of leather (there were factory made ones at the time- but crappy), another sold R14 refrigerant for cars (it was being banned for the newer 'green' refrigerant, but old cars needed it) by going shop to shop.
I myself, I used to install car audio, car phones, and security systems at people's homes or businesses - while there were plenty of Stereo shops out there - no one liked to wait in some waiting room. My company allowed them to be at home or work while I installed their toys.
DNR
-
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
He gives wisdom to the wise and knowledge to the discerning. He reveals deep and hidden things; he knows what lies in Darkness, and Light dwells with him.
Re: Glow logo on car
I apologize if I'm updating *too* much but I was just so excited!
I finally glued the thing in. I meant the duct-tape idea as a joke..but it turned out to be perfect to hold the thing in place while the glue dried.
The duct tape is what you see in the logo.
What's cool is that the logo is already lit up by the license plate light. This is with just one of the two lights working, too!
Now, for the project, to actually get the white light/brake light thing to work I'll have to make a housing of some sort. In the meantime, it's nice to know that it's already lookin kinda cool.
Thanks!
I finally glued the thing in. I meant the duct-tape idea as a joke..but it turned out to be perfect to hold the thing in place while the glue dried.
The duct tape is what you see in the logo.
What's cool is that the logo is already lit up by the license plate light. This is with just one of the two lights working, too!
Now, for the project, to actually get the white light/brake light thing to work I'll have to make a housing of some sort. In the meantime, it's nice to know that it's already lookin kinda cool.
Thanks!
Re: Glow logo on car
Nice one man
Looks really sick, good job so far. Keep working on it until its completed
*cheers
Maboroshi
Looks really sick, good job so far. Keep working on it until its completed
*cheers
Maboroshi
- bad_brain
- Site Owner
- Posts: 11636
- Joined: 06 Apr 2005, 16:00
- 19
- Location: In your eye floaters.
- Contact:
Re: Glow logo on car
looks cool man, good work...
what light are you using? the one for the license plate? because some cold cathode ones used for computer cases would be cool, there are even ones that change the color....and it would work without the need of any customization because those lights work with 12V....
what light are you using? the one for the license plate? because some cold cathode ones used for computer cases would be cool, there are even ones that change the color....and it would work without the need of any customization because those lights work with 12V....
Re: Glow logo on car
Yup ^^ It's just the license plate light right now.
Cold cathode, huh? hmmm That's a good idea.
I was already thinking about not using LEDs since it would take a cluster of them to be bright enough and it would take up much space. So, I was considering using bulbs like those used for cars anyway.
Cold cathode brings up a new option, too..and maybe a better one since I don't want the housing I make/use to get too hot and melt.
Thanks!
Cold cathode, huh? hmmm That's a good idea.
I was already thinking about not using LEDs since it would take a cluster of them to be bright enough and it would take up much space. So, I was considering using bulbs like those used for cars anyway.
Cold cathode brings up a new option, too..and maybe a better one since I don't want the housing I make/use to get too hot and melt.
Thanks!
- bad_brain
- Site Owner
- Posts: 11636
- Joined: 06 Apr 2005, 16:00
- 19
- Location: In your eye floaters.
- Contact:
Re: Glow logo on car
well, a LED cluster is also a good idea, you can also use the ones from case modding, one I really like is the "Lamptron 6-Cluster Lazer LED - Psycho Flashing":
[youtube][/youtube]
but then again it might be a little over the top and a nice old cathode would be even more cool...
[youtube][/youtube]
but then again it might be a little over the top and a nice old cathode would be even more cool...
Re: Glow logo on car
looking good that is a really slick idea.