How to post source code

Post by **bad_brain** » 09 Aug 2007, 06:09

posting source codes on the boards have always been a pain in the rear on suck-o because of the security settings (tags are filtered). decreasing the security level is no real option, so use this way to make your source codes viewable to others:

- go to http://code.suck-o.com" onclick="window.open(this.href);return false;
- paste your code in there
- pick the language to enable syntax highlighting
- finish it

- when done you will be provided with a link
- post the link on the boards

Post by **ayu** » 09 Aug 2007, 06:37

Good solution, although it would have been more "fun" if the "disable HTML in this post" would have worked, imo

rambo · Post by **rambo** » 09 Aug 2007, 23:09

Ahh excelent!; I've had troubles with this quite recently!

Post by **floodhound2** » 28 Apr 2008, 08:32

This link is broke for me. Wanted to post some code but cant seem to get to the correct spot.

G-Brain · Post by **G-Brain** » 28 Apr 2008, 08:33

403 forbidden.

Post by **bad_brain** » 28 Apr 2008, 13:50

oops, vhost config was overwritten when I did some changes on the system, pastebin is back again...