IPChanger.

No explicit questions like "how do I hack xxx.com" please!
Post Reply
User avatar
Stavros
ΜΟΛΩΝ ΛΑΒΕ
ΜΟΛΩΝ ΛΑΒΕ
Posts: 1099
Joined: 02 Jan 2006, 17:00
18
Location: Mississippi, U.S.A.

IPChanger.

Post by Stavros »

I downloaded this program from the Downloads section and FYI it doesn't work (for me at least). I don't know if you have to have like dial up (highly doubtful) or Cable for it to work. I have DSL. I ran the "Reset" file and it changed the IP from xxx.xxx.xxx.xxx (replace x's with your IP) to 0.0.0.0 and I couldn't surf the web (no surprise), however when I ran the "Renew" program it changed it back from 0.0.0.0 to my IP that I had in the first place, so it didn't do what it said which was renew would change the IP. Now that I think about it, did he mean change from 0.0.0.0 or change from xxx.xxx.xxx.xxx to another IP address? I don't know, just a heads up.

User avatar
GODhack
On the way to fame!
On the way to fame!
Posts: 36
Joined: 15 Aug 2005, 16:00
19

Post by GODhack »

it doesn't work for me too. Me DSL too> I think it doesn't work for DSL.

User avatar
bad_brain
Site Owner
Site Owner
Posts: 11638
Joined: 06 Apr 2005, 16:00
19
Location: In your eye floaters.
Contact:

Post by bad_brain »

um,are you using routers? if yes it can´t work... :wink:
it has been contributed by a member (EnvyHax), I checked the source, simple batch-files which /release /renew the ipconfig for the current adapter, if you run more than 1 network card you maybe have to set the interface name in the batch-files.

User avatar
Stavros
ΜΟΛΩΝ ΛΑΒΕ
ΜΟΛΩΝ ΛΑΒΕ
Posts: 1099
Joined: 02 Jan 2006, 17:00
18
Location: Mississippi, U.S.A.

Post by Stavros »

Ah....crap in a hat. I was hoping I could use it. Not for evil adolescent scriptkiddie purposes, but jsut to mess around with.

On another note I want to experiment with the virii, but I'm too paranoid as it is.

PLeXroD
Fame ! Where are the chicks?!
Fame ! Where are the chicks?!
Posts: 146
Joined: 25 Oct 2005, 16:00
18
Location: Denmark
Contact:

Post by PLeXroD »

all rigth could some of you xplain what you just said, cause i diddn't get a word... right...
-Never try to be uncommon, instead of that only realize it's you that is common...-

-In grater common sence Linux is better than MS Windows-

-Never try to hack platform, instead of that, only make security and teach other to do that to-

User avatar
Stavros
ΜΟΛΩΝ ΛΑΒΕ
ΜΟΛΩΝ ΛΑΒΕ
Posts: 1099
Joined: 02 Jan 2006, 17:00
18
Location: Mississippi, U.S.A.

Post by Stavros »

FYI
Scriptkiddie

A newbie on the internet, a wanna-be hacker or geek.

A person who writes simple scripts to perform hacks, cracks with little or no knowledge; uses downloads to gain 'status'.
In result causing damage out of lacking knowledge.

Plainly a wanna-be, might become someone with valid knowledge over time after self-study, which depends on the main intentions.
"I hacked download.com!!"
"Get a life, you scriptkiddie."
(when in doubt consult your urbandictionary.com)

And I wanted to look at the way the virii (viruses) were programed. I just wanted to look at the code, but I'm paranoid about infecting myself.

User avatar
CommonStray
Forum Assassin
Forum Assassin
Posts: 1215
Joined: 20 Aug 2005, 16:00
19

Post by CommonStray »

if your going to experiment with virii, do some research on what it does, what language it was made in etc... then experiment with it in a contained environment (ie within your c++ or java etc...) where you can watch the individual things it does at each time

User avatar
Talon
Newbie
Newbie
Posts: 3
Joined: 18 Jul 2005, 16:00
19

Post by Talon »

well you can mask your IP using tor, or hell you could use abatch file to change your IP,ust don't do it too longor the ISP will get pissed.

@echo off
:loop
ip /release
ip /renew
goto loop

there you go, really simple.

User avatar
bad_brain
Site Owner
Site Owner
Posts: 11638
Joined: 06 Apr 2005, 16:00
19
Location: In your eye floaters.
Contact:

Post by bad_brain »

right. but imo it makes no sense anyway. you would only get a new IP out of the ISPs IP-pool, I can see no real use in this.

User avatar
Stavros
ΜΟΛΩΝ ΛΑΒΕ
ΜΟΛΩΝ ΛΑΒΕ
Posts: 1099
Joined: 02 Jan 2006, 17:00
18
Location: Mississippi, U.S.A.

Post by Stavros »

I don't think it matters for me anyway because when I checked my IP via ipconfig it was different on two different days. Here's a question concerning IPs. Can I connnect to a friends computer in Command Prompt (in XP) via netstat command?

I don't think I said what I meant to say efficiently, so here goes: I think I have a dynamic IP.

User avatar
Decipher
forum buddy
forum buddy
Posts: 10
Joined: 08 Dec 2005, 17:00
18

Post by Decipher »

no you cant connect to a friends computer through nestat.. that just list all the activity on ur ports.. you could possibly connect using telnet if the guy running 95 lol.. and a dynamic ip is a ip that subject to change and static ip is your computer is subject to one ip address.. which is subficient for webhosting servers etc..

User avatar
Stavros
ΜΟΛΩΝ ΛΑΒΕ
ΜΟΛΩΝ ΛΑΒΕ
Posts: 1099
Joined: 02 Jan 2006, 17:00
18
Location: Mississippi, U.S.A.

Post by Stavros »

Crap, I just realized I put netstat when I meant to put telnet. Eh, is there anyway to connect via Command Prompt regardless of which windows the other person is running?

User avatar
zigo
suck-o-fied!
suck-o-fied!
Posts: 88
Joined: 07 Jul 2005, 16:00
19

telnet scanning

Post by zigo »

:roll: :roll:
I hope this text is provided to be useful, and for education . not to use it in illegaly . i warned u .

Telenet is the largest Packet Switching network, that I know of at this
present time, I could waste valuable buffer space explaining what packet
switching is and what its uses are ect...so for more information read
"Packet Switching (tomorrow's communications today) by Roy D. Rosner. It
is quite indepth and one of the books I cherish in my "legal" Telecomm
library.

DEFINITION of GTE TELENET : The packet switching subsidiary of General
Telephone and Electronics. It provides nationwide common user data
communications via packet switching


Information on GTE TELENET :
----------------------------

The GTE Telenet commercial packet switched network was developed as a
commercial venture of many of the same principals who developed ARPANET.
GTE Telenet first became in 1979.

OPERATION :
------------

Telenets network operation and internal protocals evolved from the ARPANET
experience , with additional cababilitys built into each of the switching nods.
The network is mostly a ciruit bases packet switching protocol, that does meet
the requirments of the CCITT X.25 protocol at the user interface. In addition,
Telenet also provides customized user interfaces to meet the need of the
individual users. It also provides emulation interfaces.


USER ACCESS :
-------------

User access to the network is through one of the three clases of telenet
central offices, such as the one in San Fran, support user access speeds up to
56k bps is a Class I. Class II offices, such as the one in Spokane,Wa provide
connection speeds up to 9600 bps. Class III offices support rates up to 1200
bps, such as the one in tucson,arizona. User access can be made to Public
Dialin ports, private dial in ports, or fixed ports dedicated full time for a
single user. Users can implement X.25 compatable software in there host computer
or they can just use the T-net provided interface processors to provide network
service. Terminal Clusters can be accessed to the network very effciently by use
of Telenet access controllers placed at the customers residece or business,
ect..


Telenet Dialups
---------------

To find the local Telenet dialup for your area just call WATS to 800-TEL-ENET
and ask them for it but remember to watch out "Every thing you do on telenet is
saved on Mega tape for up to 5 years, and they have installed number
identification since December 1987,

WATS TELENET DIALUPS....

(800) 424-9494 300/1200 BPS
(800) 238-0631 2400 & MPE

These wats will change in aug. 88 so if you would like the new ones leave my
E-Mail on Lunitics Labs (415) 278-7421


What to do one you have your POTS dialup:
-----------------------------------------

Remember to do any scanning on telenet you need a POTS dialup not a WATS, the
WATS dialup is mainly used for Telemail or GTE MAIL., or SPRINT HP's
Call your local dial up and you should see something that says TELENET
617 18m, or whatevr...just hit <REt> a few times. and you should see something
that looks like this.

@

at the "@" prompt type in NPA XXX..for now just use your area code...

like this....( this is a Network User Address or NUA)

@ 415 333

it will then either connect you, or say "Collect Connection Refused",
because you have not used an NUI, more on NUI's later...

you will see one of the following :

1) call connected .... <this is what you want>
2) Remote Procedure Error 11 b6
3) Remote Procedure Error 11 e2
4) Not Reachable 05 e6
5) not reachable 05 db
6) Not operating .... <try later>
7) illegal address 03 80
8) Busy 01 00 ..... <try later>
9) enhanced network services unavalible at this time please try again 05 d8
10) illegal address 03 ba
11) rejecting 00 7e
12) illegal address 03 42
13) remote procedure error 11 31
14) Refused collect connection 19 00 ..... <use NUI>
15) not reachable 05 ed
16) not responding 0d f0



if the call is connected you will find an interesting computer system, or
whatever..


What is an NUI and how do you use it..
---------------------------------------

An NUI or Network User Id is mostly used for connecting to things that give you
the "Refused collect connection" error. I always have an NUI in use when I am
scanning at the @ promt type:

@ ID USERID

it will come up with a
PASS= promt, so then you enter the password I have a listing of about 80 or
so NUI's and they usually dont die , so here is a few....

ID SIMPCNOE
PASS= 071034

ID FINLAY
PASS= 004461


NUA listing of recent things Scanned by DOC telecom:
----------------------------------------------------



NUA SYSTEM TYPE SPECIAL NOTES
--------------- ----------------------- ----------------------------------
804 35 ?
804 43 PRIME PRIMENET
303 38 PRIME PRIMENET 21.0.3.C1 SL
804 60 ?
713 436 CONNECTS
713 450 CONNECTS
713 454 CONNECTS
713 462 CONNECTS
713 431 CONNECTS
612 442 ?
415 333 AOS/VS 7.56
415 334 AOS/VS 7.56
206 20 HP 3000
206 30 HP 3000
206 32 VAX MICRO VMS V4.7
206 35 CONCURRECT COMPUTER CORP
206 38 AOS/VS 7.56
206 42 AOS/VS 7.56
206 44 AOS/VS 7.56
206 40 PRIME PRIMENET 20.2.4
206 53 CONNECTS
206 65 PRIME PRIMENET 20.1.1D OAD
206 72 DIFFRENT KINDS UNIV. OF WASHINGTON
212 137 PRIME PRIMENET 21.0.3.R7.PTC.3 NY60
909 46
303 65 COMPUTER SHARING SYSTEM
212 32 CIDIADVICE CENTER
303 23 PRIME
212 112 VM/370 ONLINE
212 131 VM/370 ONLINE
909 400
909 401
909 403
909 404
909 406
909 407
909 409
909 502
909 508 PRIME
909 600
909 615 PRIME
909 617 PRIME
212 20 "ENTER ID"
212 21 "ENTER ID"
909 810
909 800
909 801
909 802
909 805
909 811
909 815
909 818
909 819
415 37 HP 3000
617 622 UNIX MEDIA LABS...<didnt scan this>
214 71 PRIME PRIMENET FB.3.3 UUCB
212 146 OFFICE INFO SERVICE
415 20 DIALOG
213 35 MARKETRUN RESERCH AND SALES
909 95 PRIME TELENET NEWS SEWRVICE
305 22 HP 3000 CIERRA COMPUTER
201 25 DEC NJIT ELECTRONIC INFO EXCHANGE
515 30 LEXIS/NEXIS
201 67 WARNER BROTHERS SYSTEMS
201 68 WARNER BROTHERS SYSTEMS
212 28 OUTDIAL
909 12 PRIME
909 13 CONNECTS
909 51 CONNECTS
909 52 CONNECTS
909 54 CONNECTS
909 58 CONNECTS
909 26 PRIME
909 38
909 39 PRIME
909 49
909 55
909 777 CONNECTS
909 65
909 63
909 53
909 56
909 60
909 62

i dont take any credits for this tut im not the one who made it .

Post Reply